Citizen Printer

Hewlett Packard Deskjet 3847 printer troubleshooting?

I have printing problems with my printer. The procedure I am using is going to START, PRINTERS and FAXES, right click the printer icon, click PROPERTIES, then click PRINTING PREFERENCES on the page, then click PRINTER HELP. On the left are many items to choose from. TROUBLESHOOTING is clicked, then click the PROBLEM, then click the PROBLEM SOLUTION, then click TOOLBOX. When TOOLBOX is clicked to be opened, I get kicked back to the PROBLEM without the TOOLBOX being opened. How do I get the TOOLBOX to open?

Public Comments

Ever faced problems with resetting your printer? Well, here we provide you invaluable tips to help you troubleshoot your HP, Dell, Lexmark, Brother or Samsung Printers in easy steps. Resetting an HP laser printer There is a technique known as cold resetting. It basically will set all your HP printer settings to the factory default levels. It is important to note that any settings made at the control panel of your printer are going to be reset. Hence, in case you happen to have a JetDirect card then even the IP address will be reset to the factory defaults. Make sure to remove the card before resetting your HP printer. You can try to reset NVRAM. To do this, switch off your HP printer and then hold down the ‘Go’ key for around 20 seconds while switching the printer back on again. - HP 1200 and 1100 models resetting: To do this, simply change the data by going into the service mode. This is applicable if your HP printer has a display panel. Otherwise you need to hold down the ‘Go’ button for around 5 seconds while the printer is switched on. - HP 2100 printer resetting: You need to press the ‘job cancel’ key after switching off the printer. Then switch the printer on and only then release the key called ‘job cancel.’ Make sure you release the button within 20 seconds of the LEDs coming on. - HP 2200 printer resetting: Switch off your printer and then hold down the ‘Go’ key. Switch back the printer on while holding the ‘Go’ button till the light comes on. Then release the button. - HP 6P and 5P models resetting: Switch off your printer and then press the ‘reset’ button and within 20 seconds switch on the printer back again.